News information

News information

Consolidate the foundation of quality management and promote the improvement of production efficiency

2023-07-31

Strengthening management is the eternal theme of enterprise development. As the domestic head of metal 3D printing equipment manufacturer, Radium Laser fully implements lean management requirements and takes quality management as the top priority. In this process, Radium Laser Science uses "5M1E1I" and other analytical tools to solve problems and improve methods, and on this basis, it has established a complete quality management system to promote the high-quality development of the enterprise.


Solid promotion of lean management, effective realization of quality and efficiency

2023-06-08

Carry out the concept of lean management and strive to achieve "zero defect" in every detail"


Xin Jinghe and Radium Ming Laser appeared at the 7th China Space Power Joint Conference, focusing on the latest application results of metal additive manufacturing in the field of space power.

2023-05-15

From May 10th to 12th, the 7th China Air and Space Power Joint Conference was held in Suzhou. Xinjing and its subsidiary Radium Laser participated in this conference and exhibited the latest application results in the field of air and space power.


Good news | Radium Ming laser won many honors, and its scientific and technological innovation strength in the field of metal 3D printing was recognized again.

2023-05-15

In the future, Radium Laser will further dig into the needs of industrial development, stimulate enthusiasm for technological innovation, and achieve new breakthroughs in more iconic results. The company will continue to enrich the metal additive manufacturing series of equipment, to promote the application of additive manufacturing technology to a wider field.


Accurate docking of counterpart colleges and universities, Radium Laser fully promotes the introduction of talents in the field of metal 3D printing.

2023-05-15

Recently, the first school-enterprise matchmaking activity in 2023 in zhongbei town, jointly organized by zhongbei town enterprise service center and Tianjin college and secondary school graduates employment guidance center, was held in zhongbei science park. radium laser, as a high-growth and high-quality enterprise in the field of metal 3D printing, actively participated in the activity.


3D Printing Pioneer Makes Production Simpler | Radium Laser Appears in CIMT2023

2023-04-22

On April 15, the 18th China International Machine Tool Exhibition came to an end. As a national high-tech enterprise, Radium Laser made its debut with intelligent production line solutions, providing new solutions for various manufacturing industries and fully demonstrating metal 3D printing The application cases of technology in various high-end manufacturing fields have attracted great attention from exhibitors at home and abroad.


< 1234...12 >

Popular Articles


Permalloy additive manufacturing process plan, radium laser soft magnetic alloy forming process details!

Permalloy refers to an iron-nickel alloy with a nickel content in the range of 30% to 90%. This kind of soft magnetic alloy can effectively control the magnetic properties through appropriate process. It is a typical functional material with high permeability, low coercivity, high saturation magnetic induction, high Curie temperature, good corrosion resistance and good processing performance. Mainly used in alternating magnetic field, widely used in aerospace industry and telecommunications, measurement and control system. Commonly used permalloy 1J50, 1J79, 1J85 and so on. In the field of aerospace industry, permalloy is mainly used to manufacture precision components with high sensitivity, fine size, small size and low high frequency loss.

2023-08-15


New Equipment, New Advantages, New Development | Dr. Guan Kai Talks to MM "Insight" Program, Talking about the Development of Additive Material Industry

Additive manufacturing combines 3D printing with industrial production, creating a new processing method, and has irreplaceable advantages in the manufacturing of complex structural parts. Recently, Dr. Guan Kai, general manager of Tianjin Radium Laser Technology Co., Ltd., accepted an exclusive interview with MM's "Insight" program and expressed a clear view on the hot topic of additive manufacturing. MM "Insight"

2023-08-08


Gather in Chang 'an, Talk about Additive Material | Radium Laser Appears at 6th IAME Conference

The 6th China (Xi 'an) International 3D Printing Conference and Qin Chuangyuan 3D Printing High-end Forum opened today. Radium Laser was unveiled with LiM-X150A equipment and typical metal 3D printing displays, sharing technological achievements and application cases, discussing the future development direction of additive manufacturing, and going to the digital future together.

2023-08-08


Market Activity