News information

News information

Permalloy additive manufacturing process plan, radium laser soft magnetic alloy forming process details!

2023-08-15

Permalloy refers to an iron-nickel alloy with a nickel content in the range of 30% to 90%. This kind of soft magnetic alloy can effectively control the magnetic properties through appropriate process. It is a typical functional material with high permeability, low coercivity, high saturation magnetic induction, high Curie temperature, good corrosion resistance and good processing performance. Mainly used in alternating magnetic field, widely used in aerospace industry and telecommunications, measurement and control system. Commonly used permalloy 1J50, 1J79, 1J85 and so on. In the field of aerospace industry, permalloy is mainly used to manufacture precision components with high sensitivity, fine size, small size and low high frequency loss.


Driving the Intelligent Manufacturing and Upgrading of Mold Industry-Outstanding Advantages of Metal 3D Printing Technology

2023-08-07

With the accelerated development of the manufacturing industry, enterprises have increasingly stringent requirements for mold accuracy, structural complexity, production cycle and cost, and traditional mold manufacturing technology can no longer fully meet market demand. Among the many new technologies, metal 3D printing technology brings a new development direction for the mold industry with its unique technical advantages.


Self-developed Selective Laser Melting Equipment Monitoring System to Escort the Forming Quality of Parts

2023-06-08

Selective laser melting technology has high printing accuracy and has been widely used in aerospace, energy power, automobile manufacturing, mold and other fields.


Hollow cavity dot matrix structure, metal 3D printing technology for complex impeller parts manufacturing

2023-03-27

Impeller, turbine parts in modern industrial production occupies a very important position, common traditional manufacturing process has casting, machining and other ways. The development of metal 3D printing technology provides new ideas for the design and manufacture of such parts.


Metal 3D printing makes it easier to manufacture complex flow patterns

2023-02-28

In recent years, with the mature application of laser selective melting technology (SLM), its advantages in the production of complex flow-type pore structure parts are becoming more and more obvious, the technology can avoid the traditional casting process of shrinkage, pores and other defects, parts density can reach 99%.


Ancient and modern meet, metal 3D printing technology to restore the "step moon bridge"

2023-02-08

Radium laser with aluminum alloy material to restore the step of the moon bridge, with modern technology to perfectly demonstrate the beauty of the ancient building bridge. Buyue Bridge was built in the 14th year of Zhengde in the Ming Dynasty, with a total length of 127.5 meters and a width of 6.05 meters. The construction of the whole bridge does not require one nail and one rivet, which embodies the mature skills and superiority of my country's traditional bridge construction technology. The 42 wooden houses on the bridge are covered with tiles, and the wooden components crisscrossed up and down are closely connected with each other without any mistake. The shape is simple, magnificent and the structure is rigorous.


< 123 >

Popular Articles


Permalloy additive manufacturing process plan, radium laser soft magnetic alloy forming process details!

Permalloy refers to an iron-nickel alloy with a nickel content in the range of 30% to 90%. This kind of soft magnetic alloy can effectively control the magnetic properties through appropriate process. It is a typical functional material with high permeability, low coercivity, high saturation magnetic induction, high Curie temperature, good corrosion resistance and good processing performance. Mainly used in alternating magnetic field, widely used in aerospace industry and telecommunications, measurement and control system. Commonly used permalloy 1J50, 1J79, 1J85 and so on. In the field of aerospace industry, permalloy is mainly used to manufacture precision components with high sensitivity, fine size, small size and low high frequency loss.

2023-08-15


New Equipment, New Advantages, New Development | Dr. Guan Kai Talks to MM "Insight" Program, Talking about the Development of Additive Material Industry

Additive manufacturing combines 3D printing with industrial production, creating a new processing method, and has irreplaceable advantages in the manufacturing of complex structural parts. Recently, Dr. Guan Kai, general manager of Tianjin Radium Laser Technology Co., Ltd., accepted an exclusive interview with MM's "Insight" program and expressed a clear view on the hot topic of additive manufacturing. MM "Insight"

2023-08-08


Gather in Chang 'an, Talk about Additive Material | Radium Laser Appears at 6th IAME Conference

The 6th China (Xi 'an) International 3D Printing Conference and Qin Chuangyuan 3D Printing High-end Forum opened today. Radium Laser was unveiled with LiM-X150A equipment and typical metal 3D printing displays, sharing technological achievements and application cases, discussing the future development direction of additive manufacturing, and going to the digital future together.

2023-08-08


Market Activity